Epoxy Resin starter set including 7 transparent color pastes

Epoxy Starter Set, resin + hardener, incl. 7 transparent colour pastes

FL11M epoxy top coat casting resin – 7 transparent colour pastes, 20 ml each

• water-clear
• transparent
• crystal clear for castings

The following colour pastes are included:

• sun yellow
• light turquoise
• red
• red-violet
• pink
• blue
• brown

including 3 × mixing cups (500 ml)

Properties and areas of application of the casting resin starter set:

Seals metal, wood, various plastics, concrete, screed. Forms a clear, tack-free surface. Low-yellowing, tintable with pastes or pigments.

• Good mechanical properties
• High impact strength
• Surface protection, moisture barrier
• Casting applications up to 1 cm
• Osmosis protection, wood pore filler
• Carbon-look laminate
• Binder for polymer concrete

Processing data – casting resin starter set:

• Mixing ratio (by weight): 100 parts resin / 50 parts hardener
• Mixing ratio (by volume): 100 parts resin / 50 parts hardener
• Mixing ratio (low-viscosity variant): 100 parts resin / 57 parts hardener
• Pot life (working time): 40 min at 20 °C (100 g)
• Ready for load: 24 h (20 °C)
• Full cure: 7 d (20 °C)
• Processing temperature: 10 °C – 25 °C

Physical data / as supplied:  Value  Unit  Test method

• Viscosity (resin): 700–1100 mPa·s  PM.01.003
• Viscosity (hardener): 50–150 mPa·s  PM.01.003

Physical data / cured state:  Value  Unit  Test method

• Tensile strength: 40–45 N/mm²  PM.01.004
• Elongation at break: 3–4 %  PM.01.004
• Flexural strength: 70–80 N/mm²  PM.01.005
• Modulus (flexural): 3 kN/mm² (≈ 3 GPa)  PM.01.005

Sealing, thin-coat resin system
The FL11M casting resin starter set is an unfilled, low-viscosity 2-component combination of resin and hardener.